Our Credentials
We are the Authorised Dealers of One Indian Manufactures which is supplying the different type of Blowers to well-known Industries from more than 7 Years. We supply different type of Blowers like Hot Air Blowers, Centrifugal Blower, Lobe Blowers, Blower cum Exhauster, Venturi Scrubber, Fume Scrubber, Axial Flow Fans, Roof Ventilators, Dust Collector etc.
Centrifugal Blowers
Centrifugal fans are used if applications need higher pressure with the same or higher airflow than axial fans. A centrifugal blower draws in the air through the inlet axially (in parallel) to the drive axle, deflects the airflow 90 degrees through the rotation of the impellers and extracts it radially.
The airflow is extracted in a specific direction with blowers with spiral housing. A centrifugal fan without housing extracts the air radially out of the impeller with curved blades. It is one of the most suitable choices for helping in to distribute stable air flow in areas where it’s difficult to supply fresh air at constant rate.
Specifications
Fan Speed: 700 RPM to 3000 RPM
Available in various sizes 25 hp to 150 hp
Air handling capacities of 100 CFM to 100000 CFM
System resistance of 25mm to 2500mm WG static pressure
Dust Collectors
Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality
Dust collector systems work in general by drawing dust and particulates from the air through a filter that first captures and separates the matter, and then discharges purified air back into the workplace or environment
Specifications
Fan Speed: 700 RPM to 3000 RPM
Available in various sizes 25 hp to 150 hp
Air handling capacities of 100 CFM to 100000 CFM
System resistance of 25mm to 2500mm WG static pressure
Fume Scrubbers
We Supply a complete range of high-performance scrubbers that are used for removing undesirable acid fumes, chemical substances or odours from the gas stream. Fume scrubbers are designed to remove mist, entrained liquid particles, noxious corrosive gases and vapours from the exhaust air stream. Pollutant gases can generally be removed to any desired concentrations to meet local air pollution regulations. The pollutants are removed by means of absorption of Noxious, Toxic or undesirable gases into the liquid phase.
Impingement: Particulate matter is removed through impingement as it is first forced through a wetted packed bed and then through a chevron blade or mesh pad filter section.
Specifications
MOC: PVC, PP, PVC+FRP, PP+FRP, SS-316, SS-304, MS
Available in various sizes 25 hp to 150 hp
Capacities of 100 CFM to 100000 CFM
system resistance of 25mm to 2500mm WG static pressure
Venturi Scrubbers
Venturis can be used to collect both particulate and gaseous pollutants, but although the liquid surface area provided is quite large, they are more effective in removing particles since particles can be trapped by contact, but gases must be trapped by absorption during the relatively short exposure time.
Specifications
MOC: PVC, PP, PVC+FRP, PP+FRP, SS-316, SS-304, MS
Available in various sizes 25 hp to 150 hp
Capacities of 100 CFM to 100000 CFM
System resistance of 25mm to 2500mm WG static pressure
Hot Air Blowers
We are engaged in supply a matchless range of Hot Air Blowers to the prestigious customers. These blowers are presented in different capacities and are being offered at the best rates in the market. Further, it is highly acclaimed in the market for its durability and UN-interrupted performance.
Specifications
Temp. rise up-to 150 degree Celsius
Customized as per customer’s requirements
Comes with automatic control panel for 100% Safety
Blower Cum Fume Exhauster
We are involved in providing a varied series of Blower Cum Fume Exhauster. Our products are made under the management of dexterous experts. This product is mainly used to expel Gases, Vapours, and Fumes from pipeline, tank holds & underground construction as well as to supply Air breathing apparatus
Air Washer Unit
An air washer is a hybrid appliance, a combination of an air purifier and a humidifier. Air washers remove many types of household allergens—including dust, dust mites, pet dander, pet hair, mold spores, pollen, and other airborne particles—while adding moisture to the air. The most popular types of air washers use impeller technology.
specification
Air Flow : 18000 CMH to 30000 CMH
Motor Power : 1.1kw to 3kw
Axial Flow Fans
An axial fan is a type of fan that causes gas to flow through it in an axial direction, parallel to the shaft about which the blades rotate. Capable of generating a large air flow, axial flow fans are best suited for applications requiring ventilation and cooling where the entire space inside must be cooled.
Roof Ventilators:
We have designed & develop Powered FRP base Roof Exhaust Fans as per today’s industrial needs for almost 90% of manufacturing and process industries to help them in improving the best working environment.
These fans provide exhaust capacity of 10000 CFM, which is almost 20 times more effective as compared with the powerless roof ventilation fan.
Powerless Roof Fans
Motorized Roof Fans
Man Coolers
We have designed Man Coolers to provide utmost volume circulation of air, hence resulting in positive feedback from our esteemed clients.
These man coolers consist of impeller that is manufactured using cast aluminium alloy coupled on motor shaft. The motor with impeller assembles is mounted in a tubular cradle. Also, there is a provision to adjust the angle of air
